IBM Ultarstar 9ES - Quick Installation Guide free download

File name IBM Ultarstar 9ES - Quick Installation Guide.PDF

IBM storage products Quick installation guide Ultrastar 9ES SCSI Models: DDRS-34560 DDRS-39130 Setting the address Handling precautions 1. Each drive on the SCSI bus must have a unique address. Fifty pin (narrow SCSI) devices have 8 pos- 1. Do not cover the breather hole! Covering the sible addresses (0-7) with address 7 (highest priority) breather hole may result in loss of data. normally reserved for the controller. Sixty-eight and eighty pin (wide SCSI) devices have 16 possible addresses (0-15). 2. SCSI address bits 3 (68 & 80 pin only), 2, 1, and 0 of the 12-pin Option Jumper Block are used to select 2. Do not press on the drive! Do not apply any force the SCSI device ID. The shipping default is ID 6 (bits to the drive during handling or installation. 2 and 1). Note: SCSI address bit 3 is reserved on the 50-pin models 3. Always handle the drive with care to prevent Ground Bit 3 damage from shock, vibration, or electrostatic dis- 23 (1) 24 charge (ESD). 21 (2) 22 Bit 2 4. Do not open the static-protective bag containing the 19 (3) 20 Bit 1 drive until required. Static electricity can damage the 17 (4) 18 Bit 0 drive. 15 (5) 16 Enable Auto Spin Up 5. Turn off and unplug your computer. Remove cover. 13 (6) 14 Enable SCSI Terminator (50,68 pin) 6. When installing the drive, touch a grounded, 11 (7) 12 Disable Unit Attention unpainted metal surface with the static-protective 9 (8) 10 Enable TI-SDTR (50-pin) package containing the drive for at least two seconds. Enable TI-SDTR/WDTR (68, 80 pin) 7 (9) 8 Enable Auto Start Delay (This drains